Messages

1

Questions / Re: A Few Problems

« on: July 15, 2022, 02:35:14 PM »

Either your security software is removing the files referred to or you have not followed the installation instructions.
Try whitelisting MB in the security software you use and then re-install
The patch version is 3.5.8230 so it looks like you havent applied the patch version either
https://getmusicbee.com/patches/MusicBee35_Patched.zip
unzip and replace the existing musicbee application files are re-installing

Hello. I’d successfully whitelisted MusicBee in the security software, but since I reinstalled it, I haven’t been able to run it:

2

Questions / Re: A Few Problems

« on: July 14, 2022, 02:42:39 PM »

Alright, I see; sorry:

7/14/2022 2:29:41 AM - 10.0.22000.0 - 3.4.8227.39818D - System.IO.FileNotFoundException: Could not load file or assembly 'MusicBeeIPod, Version=1.6.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'MusicBeeIPod, Version=1.6.0.0, Culture=neutral, PublicKeyToken=null'
   at #=zFnIj_VGtYhedShj9eYHq5Q8=.#=zy3u6dqMos31O(Boolean #=zyIo5jQRnNSfuYhOIpg==)
   at #=zFnIj_VGtYhedShj9eYHq5Q8=..cctor()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].


7/14/2022 2:30:40 AM - 10.0.22000.0 - 3.4.8227.39818D - System.IO.FileNotFoundException: Could not load file or assembly 'MusicBeeIPod, Version=1.6.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'MusicBeeIPod, Version=1.6.0.0, Culture=neutral, PublicKeyToken=null'
   at #=zFnIj_VGtYhedShj9eYHq5Q8=.#=zy3u6dqMos31O(Boolean #=zyIo5jQRnNSfuYhOIpg==)
   at #=zFnIj_VGtYhedShj9eYHq5Q8=..cctor()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].


7/14/2022 2:31:06 AM - 10.0.22000.0 - 3.5.8150.17011D - System.IO.FileNotFoundException: Could not load file or assembly 'MusicBeeIPod, Version=1.6.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'MusicBeeIPod, Version=1.6.0.0, Culture=neutral, PublicKeyToken=null'
   at #=zqD$$AZUknYvDoXkkm1M4bzM=.#=zxs2dThYbmDxi(Boolean #=zebhX$a4uy9Eu6Si_lA==)
   at #=zqD$$AZUknYvDoXkkm1M4bzM=..cctor()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].


7/14/2022 2:46:08 AM - File open failed: 'D:\Miscellaneous Files\Tinashe\01. Tinashé - Rascal (Superstar).flac' - Unable to load DLL 'libFLAC.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
7/14/2022 3:32:13 AM - 10.0.22000.0 - 3.5.8150.17011D - System.IO.FileNotFoundException: Could not load file or assembly 'MusicBeeIPod, Version=1.6.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'MusicBeeIPod, Version=1.6.0.0, Culture=neutral, PublicKeyToken=null'
   at #=zqD$$AZUknYvDoXkkm1M4bzM=.#=zxs2dThYbmDxi(Boolean #=zebhX$a4uy9Eu6Si_lA==)
   at #=zqD$$AZUknYvDoXkkm1M4bzM=..cctor()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].


7/14/2022 3:41:35 PM - 10.0.22000.0 - 3.5.8150.17011D - System.IO.FileNotFoundException: Could not load file or assembly 'MusicBeeIPod, Version=1.6.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'MusicBeeIPod, Version=1.6.0.0, Culture=neutral, PublicKeyToken=null'
   at #=zqD$$AZUknYvDoXkkm1M4bzM=.#=zxs2dThYbmDxi(Boolean #=zebhX$a4uy9Eu6Si_lA==)
   at #=zqD$$AZUknYvDoXkkm1M4bzM=..cctor()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

3

Questions / Re: A Few Problems

« on: July 14, 2022, 01:44:26 AM »

Just updated to the latest beta version, and it still doesn’t work:







(The Max Roach et al. albums had been added manually.)

What should I do in order to fix the issue?



Oh, this time around, though, there’s something in the error log:





That said, as always, thank you very much in advance.

4

Questions / Re: A Few Problems

« on: July 07, 2022, 04:31:26 PM »

The Store version can not be patched nor updated.

Well then—if you don’t mind my asking—what should I do in order to fix the issue?

5

Questions / Re: A Few Problems

« on: July 07, 2022, 01:08:31 PM »

did you update to the patch version i linked above?
And is there anything in the error log around the time you import files (help/ support/ view error log)

As for the error log:



No, admittedly, I haven’t yet.


That said, if you don’t mind my asking, what do you mean by “replace the existing musicbee application files?” I’ve downloaded the latest Microsoft Store version of the app.

6

Questions / Re: A Few Problems

« on: July 07, 2022, 01:39:02 AM »

See the Exclude... button to the right (left, I mean) of "Choose Folders..." in your first screenshot on this thread?
Click on it and check if the monitored folders are selected or not on that pop up. If they are, then that's what's causing your issue, I believe.

They’re not.

7

Questions / Re: A Few Problems

« on: July 06, 2022, 10:38:44 PM »

Long shot, but you never know...
Could it be that while you've got the two folders set to be monitored, you also have them concurrently set to be excluded from the monitoring?

Edit: In my testing, I can see such a thing is permitted (if it's intentional, I'd personally prefer it wasn't allowed).

How could I have excluded them from the monitoring, though?

8

Questions / Re: A Few Problems

« on: July 06, 2022, 07:25:53 PM »

I wonder why it doesn’t work automatically. Any ideas why? Again, thank you in advance.

9

Questions / Re: A Few Problems

« on: July 06, 2022, 07:23:28 PM »

I’ve just attempted to add a tune to the Library, and it’s nowhere to be seen via the URL field:





That said, the manual drag does work—as does ‘Add Files to Library.’


(Oh, luckily, though, the laggy-scrolling problem has ceased to exist.)

10

Questions / Re: A Few Problems

« on: July 04, 2022, 02:50:20 PM »

Unfortunately, I’m not able to find it on my part.

Did you scroll all the way through? That field list is sorted alphabetically. So URL is somewhere further down the line between Track# and Video Kind.

Well, it turns out I’m an idiot; I’ve found it. Thank you.

11

Questions / Re: A Few Problems

« on: July 04, 2022, 02:09:33 PM »

Hello. How can I add “the Url field?” Thank you.

In Track Details view > right-click on any column header > set displayed fields... > find URL (on the left) and drag it to the right.

Unfortunately, I’m not able to find it on my part.

12

Questions / Re: A Few Problems

« on: July 04, 2022, 02:03:46 PM »

I don’t know if it’s relevant, but I’ve been dealing with this issue since I reinstalled MusicBee and didn’t back anything up.

13

Questions / Re: A Few Problems

« on: July 04, 2022, 01:27:18 PM »

Hello. How can I add “the Url field?” Thank you.

14

Questions / A Few Problems

« on: July 03, 2022, 03:58:17 PM »

They are as follows: slow/laggy scrolling and not being able to add new files automatically despite having enabled: check for updated or missing files on startup, add new files to the library; all the files, moreover, are located in monitored folders—continuously—and NOT added to the inbox.




Proof of laggy scrolling: https://drive.google.com/file/d/1uU5-9Bea6B45ir290Uu0AEpRVo48YJxE/view


That said, thank you very much In advance.